My account

Log in or register

My Cart

Basket 0

Canon ME200S-SH

Canon ME200S-SH



    Notify Me

add to cart       Add to Wish List
  • High quality Full HD output
  • Great low light performance
  • Advanced autofocus and image controls
  • Easy remote setup and installation
  • Flexible configuration

High quality, Full HD output

The ME200S-SH uses an 8.29Mp Super35mm CMOS sensor and can produce professional Full HD 1080p/1080i/720p output that can be recorded to an external recorder with up to 12-stops of dynamic range in Canon Log or Wide DR mode. Reduced motion blur with support for frame rates up to 50P/59.94P allows for slow-motion filming.

Great low light performance

The ME200S-SH is perfect for a wide range of broadcast applications including low-light capture and remote performance in light-critical situations thanks to a maximum equivalent ISO of 204,800. It also has the ability to capture infrared in colour, employing a retractable infrared cut filter that can be activated at the press of a button.

Advanced autofocus and image controls

The ME200S-SH features Dual Pixel CMOS autofocus, which enables continuous AF with compatible EF lenses. This sensor-based, phase-detection technology is designed to provide smooth, high-performance continuous focus. It is a unique, Canon-developed technology that helps maximise the creative options offered by fast lenses and shallow depth-of-field. Electronically controlled ND filters also allow greater control over the image, while multiple Custom Picture settings can be saved and recalled for later use.

Easy remote setup and installation

The small, compact and lightweight ME200S-SH features extensive connection options for a monitor, output to an external recorder and remote control, including HDMI out, Genlock and two 3G/HD-SDI terminals. Remote control is possible via two sockets, including a 2.5mm jack and RS-422 terminal for the Canon Remote Controller RC-V100*

Flexible configuration

Featuring an EF mount with Cinema Lock the ME200S-SH will support a wide selection of compatible EF/EF-S lenses across the Canon range, including zooms, primes and selected Canon Servo lenses** (with a 12-pin interface) for greater control and creative shooting opportunities.

Image Sensor  
Sensor Super 35mm CMOS Sensor 
Filter RGB Primary Colour Filter (Bayer array) 
Effective pixels per sensor Approx. 8.29MP (3840 x 2160) 
Minimum illumination 59.94 Hz mode: 0.015 lux. 50Hz mode: 0.013 lux 
ND filter Yes, 2 Glass ND filters (1/8, 3 stops or 1/64 , 6 stops). Automatic / Manually selected electronic control 
Horizontal Resolution Depends on the lens used. 
Lens Mount Canon EF mount with Cinema Lock 
Focus control Manual Focus using lens or via RC-V100 Remote Control; One Shot AF via assignable button, Dual Pixel CMOS AF with compatible EF, EF-L and EF-S Lenses 
Iris control Manual; 1/2, 1/3 stop increments or Fine (approx 1/8 stop). Push Auto Iris via assignable button. Auto (combined function combining Iris, Gain, Shutter and ND filter operation) 
Aperture range Depending on selected lens 
Image stabilization Depending on selected lens 
Digital Tele Converter Yes : X2/ X4/X8 magnification 
Image Processor  
Type DIGIC DV 4  
Sampling accuracy YCbCr 422 via 3G/HD-SDI; RGB 444, YCbCr 444, YCbCr 422 via HDMI 
Bit depth 10bit, 8bit effective 
Video storage media External Recording Device 
Recording file format Depending on External Device 
Recording frame rate 3G/HD-SDI Output: 1920x1080: 59.94P/59.94i/50P/50i/29.97P/25P/23.98P
1280x720: 59.94P/50P/29.97P/25P/23.98P
HDMI Output: 1920x 1080: 59.94P/59.94i/50P/50i/29.97PsF/25PsF
1280x720: 59.94P/50P
640x480: 59.94P
768x576: 50P 
Slow/Fast motion No 
Interval Record No 
Frame Record No. 
Pre Record (cache record) No 
Scan Reverse No 
Custom Picture Options CP1 - CP6, EOS Standard, Wide DR, Canon Log. Normal 1 - Normal 4, EOS Standard, Wide DR, Canon Log available as Gamma Profiles. 
HD->SD conversion No 
Audio Recoring 48kHz, 16-bit 2 Channel Linear PCM 
Audio in 3.5mm stereo mini jack, plug-in power mic supported 
Headphone output No 
HDMI Yes. Output only,  
3G/HD-SDI output Yes, X2; Output 1 OSD compatible, Output 2 Clean output only. 
Time code No 
Genlock Yes, input only, BNC 
Component out No 
AV terminal No 
DC input Yes x2, 4-Pin XLR, 2-Pin connection. Input 11 - 17V 
Lens Terminal Yes, 12-pin connector 
Remote Control Terminal Yes, x2: Remote A: 2.5mm mini jack/Remote B: Circular 8-pin . Both utilise Canon Unique Protocol. 
Memory Card connector Yes, microSD card (for firmware update only, no recording capability) 
Colour Bars Yes, SMPTE, EBU and ARIB depending on system frequency 
Tally lamp No 
Custom key No 
User Assigned Functions Yes, 3 buttons. 4 functions available if using RC-V100 accessory
Assignable items:One-Shot AF / Push Auto Iris / ABB /AE Shift + / AE Shift - / Bar / Set WB /Tele-converter / Infrared / External Rec / Custom Picture /
Camera Mode A/M. These items work with the RC-V100 remote controller. 
Custom Dial No 
Exposure metering Backlight, Standard, Spotlight 
Exposure compensation Yes: 2.0, 1.75, 1.50, 1.25, 1.0,0.75, 0.50, 0.25 or 0 
Exposure Lock No 
Auto Gain Control setting Yes , OFF (56dB) or value from 30dB to 54 dB (in 3 dB increments) 
Dynamic Range Canon Log/Wide DR mode: 800/12 stops at 9.0dB (Approx. ISO 900) 
Gain setting 0dB to 56dB in 3dB intervals. 
Equivelent ISO Range (Approx.) 320 - 204800 
Shutter speed  
Control Modes Manual 1/4 stop increments, Auto (combined function combining Iris, Gain, Shutter and ND filter operation) 
Shutter speed 1/3 sec - 1/2000 sec depending on recording mode and system frequency 
Shutter Angle No 
Slow Shutter (SLS) No 
Scan Reverse Yes 
Clear Scan No 
Infrared shooting mode Yes: IR Cut-out filter, electrically operated.  
Built-in IR lamp No 
White balance  
Auto YES 
Preset Daylight/Tungsten 
Shockless WB Yes, via Custom Function Menu 
Manual setting Set A, Set B (Default 5,500K)Kelvin ( 2000K - 15000K) 
Auto Black Balance Yes 
Time Code  
Countup system No 
Start value setting No 
Recording Linear PCM 48 kHz 16-bit digital conversion, 2 channels 
Supplied 2-pin power adapter 
Optional RC-V100 remote Control Unit, 8-pin remote cable RR10, RR100 
Power Input  
Operating Voltage DC: 11 - 17V via 4-pin XLR or 2pin connector 
Power Consumption 11W (Approx.) 
Dimensions 102mm x 116mm x 113mm (W xH x D) 4.0 x 4.6 x 4.4 inches 
Weight (camera only) Approx. 1.0 kg (2.2 lbs) body only 
Operating Approx. 0C to 40C, (85 (relative humidity), Approx. -5 to 45C 60 relative humidity) 

Customer Reviews

This product has not yet been reviewed.

Write a Review

Please login or register to write a review for this product.