My account

Log in or register

My Basket

# of Items : 0

Pocketwizard Plus IV

Pocketwizard Plus IV

€199.00 €99.00 €100.00

EAN / UPC : 850386005249 | Brand : Pocket Wizard

add to basket       Add to Wish List       Add to Registry

You now have the best of both worlds in one easy-to-use, reliable wireless trigger.

The Plus IV Auto-Sensing Transceiver allows photographers the benefit of on-camera TTL flash combined with remote manual flash.

Whether you shoot portraits, weddings or sports, having the ability to combine on-camera TTL flash with remote manual flash provides you with a huge competive edge.

On-Camera TTL Flash / Remote Manual Flash

The Plus IV features a top shoe providing TTL compatiblity with most Canon, Nikon and Panasonic cameras and flashes as well as some Fuji and Olympus gear. This allows photographers the versatilty to shoot with an on-camera flash in TTL mode while triggering their remotes in manual mode. Easily slide a speedlight into the top shoe of your receiviing radio and you are ready to start triggering your remote flash in minutes. A perfect setup for wedding photographers.

Top Shoe

The top shoe on the Plus IV allows photographers to easiy set-up their speedlights.  No sync cord required.

Simple User Interface

The Plus IV has an intuitive user interface where all channels, zones and modes can be easily engaged via a soft-touch keypad, and displayed on an easy-to-read backlit 2.5cm (1”) LCD display. When you’re working in dark environments, simply press any key other than TEST to illuminate the LCD. 

32 Channels

With 32 channels (16 standard plus 16 Quad-Zone Triggering channels), the PocketWizard Plus IV Transceiver enables you to trigger individual or groups of lights simultaneously or individually. This is critical for working in crowded venues or with multiple lighting set-ups.

Quad-Zone Triggering

Selective Quad-Zone Triggering keeps you shooting photos, not running back and forth to your lighting or cameras. Without leaving the camera position, you can wirelessly activate or deactivate your remote flashes or cameras in 4 separately controllable zones: A, B, C, or D. This is ideal when using multiple lighting setups or turning remote cameras or flashes on and off as needed.

Auto-Sensing Transceiver

With our patented Auto-Sensing Transceiver technology, the Plus IV Transceiver is one smart radio. When set to TxRx, it will instantly and intelligently switch between transmitter and receiver modes as needed for greater flexibility on the job. The Plus IV may be set to transmit (Tx) or receive (Rx) independently if needed.

Two-Stage Remote Camera Triggering

The Plus IV Transceiver is the perfect solution for remote camera triggering. The unique two-stage TEST button on the Plus IV works just like the shutter release button on your camera. Press it halfway and your remote camera wakes up to meter and focus. Press TEST all the way to take your photo. When released, your remote camera will return to sleep mode normally; a real battery saver.

Auto-Relay Mode

Our Auto-Sensing Transceiver technology lets you trigger a remote camera in sync with remote flashes using only 3 PocketWizard radios: the one in your hands, a Plus IV cabled to your remote camera, and the one connected to your remote flash set to one channel higher.

Long Range Capability

Range is comparable to other PocketWizard radios. Shooting environments are seldom ideal, so the Plus IV incorporates two range extending modes for the challenges of the real world. Use Long Range Mode (LR) to nearly double the effective triggering distance in almost any environment.

Repeater Mode (RP)

In very challenging environments or extremely long working ranges, place a Plus IV in Repeater Mode (RP) between your transmitter and receiver to repeat the signal and complete the connection. These modes take a little extra time to do their jobs, so maximum X-sync may be reduced when firing remote flashes in LR or RP modes.

High Speed Receive

Normally, the Plus IV is capable of triggering lights or cameras at a sustained rate of up to 12 frames per second (FPS), with a standard for PocketWizard radios. Set the Plus IV to High Speed Receive Mode (HSR) and trigger at rates up to 14.5 FPS, beyond the capability of most of today’s cameras. This mode can also help high FPS triggering compatibility for any flash. TTL operation reduces the fastest FPS a system can use.

External Power and Firmware Upgradeable

The Plus IV is normally powered by two AA (IEC:LR6) batteries. For long term remote placement, use an AC adapter, like the PW-AC-USB Adapter, that plugs into the standard Mini-B USB port of the Plus IV. The USB port also enables future upgrades of the Plus IV operating system.

PocketWizard Compatible

The Plus IV is compatible with all Standard channel or simple triggering
PocketWizard radios of the same frequency* including PocketWizard-enabled photo gear from Profoto, Dynalite, Norman, Photogenic and Sekonic light meters. The PocketWizard wireless system allows for total flexibility with whatever lights or cameras you may be working with. (*FCC and CE PocketWizard radios work on different frequencies)

Basic Compatibility:

The Plus IV is a radio transceiver, capable of acting as a transmitter or receiver for triggering remote flashes and cameras. It requires at least one other PocketWizard radio for wireless triggering. It can be connected to almost any remote flash via the top shoe or connected to almost any camera with the proper cable.

Detailed compatibility:

Compatible for use with industry standard hot shoes, PC sync terminals, etc.  Safe 3 volts sync voltage for modern digital camera systems.

Compatible with most flashes and triggering circuits.  Can handle up to 300 volts.  See our cables and adapters section for appropriate connecting cables.

2-Stage triggering works as expected for most modern cameras when using an ACC cable.  A few exceptions are detailed below:

Plus IV Operational Considerations:

1) Nikon Cameras with MC-DC2 ports do not provide half-press, or full press output through the MC-DC2 port.  This means that any camera using an N-MCDC2-ACC cable won't be able to provide the "half press your remote camera from the camera in your hand" operation when using the shutter release button.  This affects the following cameras:

  • D90
  • D7000
  • D5100
  • D5000
  • D3100

Note: This does NOT impact half-press or full-press INPUT to the camera, as this works just fine with the N-MCDC2-ACC cable on a remote camera.

2) Nikon Camera's with a MC-DC1 port using an NM4-ACC cable does not provide "half-press" output, but it does provide "full-press" output.  This affects the following cameras:

  • D70s
  • D80

3) Compatible with flashes up to 300 Volts.

Current Firmware: 1.500
Frequency FCC/IC model: 344.04 - 354.00  MHz North AmericaCE model: 433.62 - 434.22 MHz EU/Asia/Other
Channels: 32 channels1-16 Standard Channels17 - 32 selective Quad-Zone Triggering channelsReverse compatible with all PocketWizard radios using Standard or Quad-Zone Triggering channels
Zones: A - B - C - DCompatible with other PocketWizard radios with Quad-Zone Triggering channels
Antenna: Precision tuned internal coil
Display: Backlit 2.5cm (1.0") liquid crystal display (LCD)
Range: Comparable to other PocketWizard radios (Actual range is dependent on multiple factors including equipment, mode, environment, positioning,orientation and interference)
Sync Speed: Up to 1/250 for focal plane shuttersUp to 1/500 for leaf shutters
Triggering Speed: Up to 14.5 frames per second (FPS)
Contact Time: 62 milliseconds in normal operation2 milliseconds in High Speed Receive (HSR) Mode
Status Indicator: LED: Green, Amber, Red status indications
Transmit Output Power: Less than 1 milliwatt (0.001 watt)
Power: Two (2) AA (IEC:LR6) alkaline recommendedNiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately)USB (optional AC adapter PW-AC-USB available)
Battery Life: Approximately 50 hours (with alkaline batteries)
Max Port Sync Voltage: Camera / Flash Port: 300 VoltsHot Shoe (off camera): 300 VoltsHot Shoe (on camera): When using a 3rd party flash on camera, verify camera and flash specifications for voltage compatibility. On camera speedlights are directly connected to the cameras hot shoe electrically.
Mac Current Handling: Camera / Flash Port: 1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuouscurrent limited
Voltage Present: 3 volts, safe for use with all digital and film cameras
USB: USB 2.0 Mini-B Connector
Housing: High impact plastic with captive battery door
Weight: 130 grams (4.7 ounces) with batteries installed 
Dimensions: Height: 4.5cm 1.8")Width: 5.9cm (2.3")Depth: 10.4cm (4.1")
Operating Temperature: Above -15 degrees C (5 degrees F) and below 50 decrees C (120 degrees F)
Storage Temperature: Above -30 degrees C (-22 degrees F) and below 85 degrees C (185 degrees F) (without batteries)
Input/Output: 3.5mm (1/8") stereo miniphone jack, hot shoe
Mounting: Metal foot, 1/4-20 threaded insert
In the Box: Quick GuideOperation reference sticker
RoHS Compliant: Yes
Optional Accessories: Isolation bar, trigger buttons, camera motor drive cables, PC cables and adapters, flash sync cables and protective case