Beachtek DXA-BMD
The Beachtek DXA-BMD is a two-channel, passive audio adapter for connecting professional audio gear from boom mics, wireless mic and mixing boards to the Blackmagic Cinema Camera.
The DXA-BMD uses exceptionally low noise, wide bandwidth, balancing transformers for pure, clean audio with no electronics to get in the way. This allows you to record high quality audio directly to the camera which will always be in sync with the video. Direct audio recording eliminates the need to have a separate audio recording device and syncing the audio in post editing.
Built-in VU meters makes it easy to verify the proper signal levels at a glance, while the level controls allow you to quickly adjust the output signals for optimum recording – no need to fiddle with camera menus. The built-in phantom power feature powers professional boom mics requiring 48 volts to operate.
The adapter mounts neatly to the bottom of the camera and can also be mounted to any standard tripod.
Input Levels | MIC level: 0dB on the VU meter at -44dBu input LINE level: 0dB on the VU meter at +10dBu input |
---|---|
Frequency Response | 20Hz to 20kHz (+/- 0.5dB) |
THD | Less than 0.01 @ 1 kHz, -30dBu input |
S/N Ratio | 85 dB @ 1Khz, -30dBu input |
Gain | Unity |
VU meter | -18 to +3dB in 3dB increments |
Battery Type | One 9 volt alkaline or lithium battery |
Battery Duration (no phantom) | 6 hours typical with alkaline battery 12 hours typical with lithium battery |
Dimensions | 6" x 3.75" x 1.75" (L x W x H) (152 mm x 95 mm x 44 mm) |
Weight | 18 oz (0.51 kg) |
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend