Canon DM-E100 Stereo Microphone
)
Take your movies to a brand-new level with thanks to a small and practical microphone offering stereo sound and low noise.
- Capture crystal clear sound with reduced noise
- Easy to use with a plug and play design
- Lightweight, pocket-sized design
- Worry-free sound recording
- Works with compatible Canon cameras
Add crystal clear stereo sound to your movies using this high-quality lightweight microphone that plugs direct into your compatible Canon camera.
Capture crystal clear sound with reduced noise
Thanks to an electret condenser design boasting 120º unidirectional stereo sound down to -40dB sensitivity, great quality audio is easy to achieve.
Easy to use with a plug and play design
With power coming directly from the 3.5mm audio jack, the microphone does not require a battery and is always ready the moment the camera is turned on.
Lightweight, pocket-sized design
Weighing just 64g and no bigger than the palm of your hand, the microphone barely adds any extra weight to your camera and slips easily into a pocket or camera bag.
Worry-free sound recording
The microphone is designed to offer you the easiest route to high quality recording with a secure hot shoe mount that secures the microphone to the camera.
Works with compatible Canon cameras
The microphone works with the EOS 200D, 250D, 800D, 77D, 80D, 90D, M50 and M6 Mark II as well as PowerShot G7 X Mark III. Please check your camera is compatible.
| Canon Stereo Microphone DM-E100 | |
|---|---|
| Microphone Type | Electret condenser type stereo microphone |
| Directional sound pick-up | Unidirectional 120 (Stereo) |
| Sensitivity | -40 dB 4 dB (1 kHz, 0 d B1 V/Pa) |
| Frequency range | 100 - 10000 Hz |
| Output Impedence | 2 kO (kilo Ohms) or less |
| Signal-to Noise Ratio | 66 dB or higher |
| Battery | None |
| Power Source | Plug-in power (powered by the camera ) Power source voltage range: 1.25 V |
| Cord Length | Approx. 260 30 mm |
| Connecting terminal | Stereo mini plug (diameter 3.5 mm) |
| Attachment method | Hot Shoe mount with foot lock ring |
| Wind Screen | Included |
| Working temperature range | 0 +40C (32 104F) |
| Working humidity | 0 85 |
| Dimensions (W x H x D) | Approx. 30.5 (W) x 66.5 (H) x 88.2 (D) mm |
| Weight | Approx. 64 g |
The EU's General Product Safety Regulation (GPSR) promotes consumer safety and confidence by ensuring compliance with product safety standards and improving recall effectiveness. To meet these requirements, we provide the Manufacturer's information below along with the EU Responsible Person's details, where applicable. As always if you have an issue with any product we firstly recommend that you make direct contact with the shop and we will endeavour to assist you.
Responsible Entity in the EU
Canon Europa N.V.
Bovenkerkerweg 59,
1185 XB Amstelveen,
The Netherlands
canon-europe.com
Ph +31 20 545 8545
Manufacturer
For cameras (EOS, IXUS, PowerShot, Cinema EOS), lenses, and Canon accessories that can be attached to cameras or lenses, camcorders (LEGRIA), printers (imagePROGRAF, MAXIFY, PIXMA, SELPHY) and consumables, and scanners (CanoScan).
Canon Inc.
30-2, Shimomaruko 3-chome,
Ohta-ku,
Tokyo 146-8501,
Japan
canon-europe.com/support
Manufacturer
For calculators, Zoemini products and Canon consumables, backpack (CB-BP13), and cases (DCC-1830, DCC-1950, DCC-2400).
Canon Electronic Business Machines (H.K.) Co., Ltd
17/F., Tower 1,
Ever Gain Plaza,
82-100 Container Port Road,
Kwai Chung,
Hong Kong
canon-europe.com/support
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend