Sony NPA-MQZ1K Multi Battery Adaptor Kit

Dimensions	(W H D)Approx. 123.4 x 67.8 x 66.2 mm(4 7/8 x 2 3/4 x 2 5/8 inches)
Weight	Approx. 400 g (14.2 oz) ( Not including battery )

For extended shooting

This battery adaptor can load four NP-FZ100 Z-series batteries and supports extended shooting.

Supply power to a camera compatible with Z- or W-series battery

This Multi Battery Adaptor Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.

Quickly charges NP-FZ100 batteries

This battery adaptor can quickly charge up to four NP-FZ100 Z-series batteries via AC adaptor within about 480 minutes. Power charge condition is indicated in a 3-level LED when the “remaining battery power” check button is pressed.

Select power supply or battery charge

DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.

Equipped with two USB ports for power output

Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.

Setting flexibility for varied shooting scenes

This battery adaptor provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.

Turn into a more compact size

If you remove battery protector and put battery port covers into place, Multi Battery Adaptor turns into a smaller easy-to-carry adaptor for two batteries.